Teradek Bolt 500 LT Zero Delay Wireless
3G-SDI Video TX/RX

The Teradek Bolt LT 500 is the latest version of the award winning wireless 3G-SDI monitoring system that transmits zero delay uncompressed 10 bit HD video at up to 1080p60 with 4:2:2 colour fidelity - The signal frame rate and size matches the...

Teradek

[TER-BOLT-925]

The Teradek Bolt LT 500 is the latest version of the award winning wireless 3G-SDI monitoring system that transmits zero delay uncompressed 10 bit HD video at up to 1080p60 with 4:2:2 colour fidelity - The signal frame rate and size matches the input rate. The LT version is the High performance model (but does not support adding 3D Luts in transit) -  you could even record from this signal as a backup, it's that good. The Bolt 500 Transmitter has external antennas to improve the signal. The Bolt LT retains critical features of previous models including AES128 bit encryption to protect the video feed.

If you need HDMI input/output instead then use a converter like the Datavido DAC70 or see our Paralinx Ace HDMI zero delay video sender/reciever system - they are owned by the same parent company as Teradek now and the product lines use very similar technology.

The Teradek Bolt LT 500 system has a looping 3G-SDI input on the transmitter so you can connect a local monitor if used on a steadicam sled or rig, single 3G-SDI outputs on the receiver and can transmit to multiple receivers simultaneously at up to 500ft away. We currently have a single transmit and receive pair. The Bolt LT is compatible with the new Bolt XT system and offers the same wireless performance as the XT range (which has HDMI and SDI). The Bolt LT 500 is backwards compatible with 3rd generation Bolt 500, Bolt 500 XT, Sidekick II and 703 Bolt.

Audio embedded in the SDI is supported 24 bit 48Khz PCM audio over the video link.

The transmitter is housed in a rugged machined aluminium chassis with several M3 (3/8") and a 1/4” threaded mounting holes for easy attachment to your camera. We normally supply this with a hot shoe mount but you can add on Zacuto micro Z-arm articulating arms to attach onto your rig.

Couple this unit with our Panasonic 8.9 SDI HD directors monitor/ focus puller monitor or the Blackmagic Focus Asist Monitor/Recorder and power the unit from the monitor Vlock DTAP adapter or use it with an SDI to HDMI adapter on an HDMI screen.

The Bolt LT supports metadata, timecode and start/stop flags from certain camera manufacturers. See the Bolt website for details:

https://support.teradek.com/hc/en-us/articles/217446087

The kit comes with :

Teradeck Bolt LT 500 3G-SDI transmitter and Bolt LT 500 reciever with 3G-SDI only.
2 x 2pin lemo connector to DTAP cables
2 x short SDI BNC coax cables
1 x Hot shoe adapter (1/4 inch)
1 x 1/4 to 3/8 male stud adapter
1 x 3/8 male to light stand adapter for receiever
2 x Antenna 2dBi Wifi 2.4/5.8GHz for the transmitter
1 x USB cable
1 x mains power supply to 2 pin lemo 18W AC power

If you need more power for either end then see our power section for more options on battery plates with D-Tap/P-Tap connections and suitable V-lock batteries and chargers. The Bolt 500 transmitter comes with a Canon LE-6 battery plate attached with a 2 pin lemo cable and this can be used to power the transmitter. Add on Canon LE6 batteries and a canon battery charger to your hire.