Paralinx Ace HDMI Zero Delay Wireless
TX/RX Video System

The Paralinx (part of Teradek) Ace is a high quality wireless HDMI monitoring system that transmits zero delay uncompressed HD video at up to 1080p60 up to 100M away. The received signal frame rate and frame size matches the input rate. Made by same...

Paralinx

[hdmi-wireles]

The Paralinx (part of Teradek) Ace is a high quality wireless HDMI monitoring system that transmits zero delay uncompressed HD video at up to 1080p60 up to 100M away. The received signal frame rate and frame size matches the input rate. Made by same company that makes Teradek video systems.

The transmitter can Multicast to up to 4 receivers simultaneously at up to approx 300ft/100m away. We currently have a single transmitter and receiver pair, both HDMI. This is great for use on a Gimbal to view the action on a directors monitor or for remote focus control or on a monopod for live work when you have line of sight at short distances. If you need SDI instead of HDMI then check our Teradek Bolt 500 LT SDI systems.

The transmitter and receiver are housed in a mixed aluminium and ABS plastic enclosures - lightweight and include mounting brackets for easy attachment to your camera.  They come with Canon battery plates as well as Dtap cables. Couple this unit with our Portkeys 5 inch SDI/HDMI monitor or the Blackmagic 7 inch HD/4K Focus Assist Monitor/Recorder or the 5 inch Blackmagic assist monitor/recorder and power the unit from the monitor bracket,or plug directly into a HDMI compatible TV screen for large on set monitoring. You can use an HDMI to SDI adapter to connect to SDI cable monitors too.

Click to download the Paralinx Ace Manual: Paralinx Ace HDMI quick start Guide

The transmitter can either be powered by a single Canon LP-E6 battery or via the supplied d-tap/p-tap cables.
The receiver can be powered either by the mains adapter or a single Canon LP-E6 battery

The supplied D-tap cable also allows the transmitter to be powered directly from a DJI Ronin or Ronin-M.

If you need power for either end then see our power section for more options on battery plates with D-Tap/P-Tap connections and suitable V-lock batteries and chargers.

Included:

• 1 x Transmitter fitted with Canon LP-E6 battery plate & coldshoe mount
• 1 x Receiver fitted with Canon LP-E6 battery plate
• 2 x D-TAP/P-TAP cables
• 1 x Mains adapter

*Canon LP-E6 batteries & charger are available as an add-on.

Specifications:

• Zero-latency (less than 1ms)
• Range: Up to 300ft/100m
• Signal Quality: Uncompressed, up to 1080p/60
• Input/Output: HDMI
• Power: 7-17v barrel
• Weight: 126g (Tx), 146g (Rx)
• Enclosure Dimensions:
  • Tx: 2.6in x 4.7in x 0.6in (6.7cm x 11.9cm x 1.5cm)
  • Rx: 3.4in x 4.5in x 0.6in (8.6cm x 11.5cm x 1.5cm)