Latest 20 Rental Kit Additions | Maniac Films

Wireless Directors Monitor 7inch SDI HDMI Kit with Vlock Batteri - �100.00

Thu, 23 Apr 2026 01:45:05 +0100

Now available to hire as a wireless Directors monitor kit we have combined our Blackmagic Video Assist 4K HDR 7 inch monitor/recorder with IDX micro V-lock batteries and the super reliable DJI SDI Transmission wireless video kit. We have aded a set of Ronfird Baker Moose bars with arri rosettes to the cage plus a thick padded neckstrap to allow you to hold or wear the monitor for extended periods. The DJI kit includes stud adapter sto fit onto a standard C-stand as well so you can put the monitor on a stand and view it in daylight conditions. Now itandrsquo;s easy to add professional monitoring and broadcast quality HD andamp; 4K video and audio recording to any SDI or HDMI camera as the DJI system lets you transmit high quality video and audio over HDMI and SDI. The Blackmagic monitor allows you to receive video over SDI and HDI plus recording to SD cards or SSD. The new 12G HDR monitor includes 4built in scopes, enhanced focus assist features, 3DLUTs, up to 4K internal recording and native Blackmagic RAW recording from supported cameras. With a super bright 2500nit 7 inch display thatandrsquo;s larger than the built-in screen on most cameras, Video Assist makes it easier to frame your shots and get absolutely perfect focus! The monitor has dual SD card slots for recording dailies or for added safety. You can apply LUTS as well as record BRAW clips. The DJI video system provides super high quality video transmission over a long distance so recording directly on the monitor is actually a useful fallback in live scenerios. This wireless directors monitor kit is supplied with: 1 x mains power adapter (UK) 1 x smallrig cage (removable) 1 x sunhood (removable) 1 x smallrig/FXlion Vlock plate and battery cable or adapter 1 x IDX dual Vlock charger 2 x IDX Micro Vlock batteries - or we can provide larger 150W PAG batteries if needed. 2x mini XLR to female XLR cables to plug in your micand#39;s (with monitor kit) 1 x padded neck strap 2 x Ronford baker Moose bars with extra rosettes on the cage for attaching them either side

Wireless Directors Monitor Kit 5inch HDMI SDI HDR - �70.00

Thu, 23 Apr 2026 01:45:05 +0100

Our small wireless Directors monitor kit combines our DJI Transmissionwireless video kit and Blackmagic 5 inch HDR monitorinto a small handheld package which includes the of Smaller IDX Vlock Micro dual battery kit and HDMI and SDI video connection between the wireless video receiver and the 12G monitor. Being able to monitor your shot plays a very important role in creative filmmaking, but sometimes if you are using a camera crane, jib, gimbal or steadicam or simply filming in a small space, it isnand#39;t practical to have another person stood next to the camera or to run a long cable. This kit includes the DJI SDI Transmission wireless transmitter andamp; receiver, 5 Blackmagic HDR monitor/recorder, IDX micro v-lock dual battery kit and any necessary cabling. We have also attached a spigot receiver to the base allowing it to sit on a short c-stand - ask us if you need a lightweight stand as an additional extra, we can add to your order for mounting the monitor. The kit includes the necessary Vlock battery plate for the monitor,2 x Blackmagic micro bnc connector to BNC female adapter cable, short or coiled BNC SDI cable, HDMI cable, removable sun hood. The monitor itself has an SD card slot where you can record shots for safety or for a quick daily in a variety of codecs at HD size. We have SD cards available if needed.

Blackmagic Micro Studio Camera 4K G2 and 14-42mm Lens KIT - �43.20

Thu, 23 Apr 2026 01:45:05 +0100

We have added the Blackmagic Design Micro Studio camera G2 4k 12G Kit to our live kit to complement the Blackmagic 6K Studio camera for live event shooting. Billed as the and#39;Worlds Smallest Ultra HD cameraand#39; the 4k G2 really is tiny and can be slotted anywhere you can think of. We have added a cage to give more mounting options, but you can strip it right down to just the camera if you really need it tiny. This camera kit is complete with a very functional XLCS Designs camera cage, a Micro 4/3rd Panasonic-Lumix G X Vario 14-42mm f3.5-5.6 Power OIS Zoom Lens and several pigtail cables, a small FX Lion Vlock plate and small nato rail for mounting a monitor like the Blackmagic 5 inch focus assist monitoror couple with the new PYXIS monitor for touch control too over the usb-c connection. You need to add a small usb-c hub if you want to record to SSD over usb-c and use the Pyxis monitor as a touch screen at the same time. The camera supports 1080 and 4K 12G output via micro SDI as well as full size HDMI output and can be fully controlled from the Blackmagic Vision Mixer range like the ATEM 4K Production mixer we have available for hire. Control of Zoom, Iris, Focus as well as Gain, colour adjustment can be performed on the camera or via the remote ATEM link. Connect a second SDI cable from the ATEM back to the SDI input for camera control from the ATEM software or hardware panel. This micro 4/3 camera can record 4K 12G BRAW to an SSD via the USB-C port, or you can record from the HDMI or SDI signal on a remote recorder. The menu system on the camera can be used to set up a clean feed or to display the menu system itself. Ideally, very first setup needs to be done on an external monitor as it has no built-in monitor. We tend to set the HDMI out for the monitor and can then use the menu to set up frame rate and recording options and leave the SDI out as a clean feed (with selectable LUT) before mounting the camera. You can record LUT or not to the SSD. Alternatively, connect to an ATEM mini over HDMI and get colour correction control and record trigger from the switcher. This really is a micro cinema camera that also includes a built in microphone and a tally light and an external mic (mini jack) connection to make it super versatile. The sensor resolution is 4096 x 2160 and supports from 23.98 to 60p at 4k for 12G operations. The camera has exceptional low light performance too and features dual native ISO of 400 (0dB gain) and ISO 3200 (18dB gain) which provides 13.3 stops of dynamic range. If you have a Blackmagic Vision mixer, this camera is a valuable addition for live events as an unmanned camera that can be adjusted remotely. Or if you want to use this for what you might have used a GoPro for and get professional 12G output and BRAW recording, its a great combination. The cage can be removed if needed, but there are mounting holes on the cage below and above and a cheese plate on the back allows you to fit many accessories or mounting options. We have two different cage variants for this 4K Micro camera - the XLCS Design cage shown in the images and also a camera cage by 8Sinn which does not have a back cheese plate but still covers the top/bottom and sides with enough threaded holes to be useful, and a cold shoe mount built in. The back cheese plate and extension arms do come off the XLCS cage if needed to make that cage more compact, especially if you are not needing the Vlock plate. Talk to us about options. This kit comes with: 1 x Blackmagic Design Micro Studio camera 4K G2 2 x SDI micro to SDI female pigtail cables 1 x Locking power to DTAP cable 1 x Locking power UK mains adapter 1 x FxLion Vlock plate with mounting bolts and allen key 1 x small Nato rail plus adjustable Nato screw mount 1 x locking USB-C cable to USB-C 1 x Panasonic Lumix 14-42mm OIS Power Zoom Lens 1 x XLCS Design or 8Sin Camera cage 1 x Canon Battery (charged when fitted to the camera by external power) 1 x Samsung SSD holder with cage bolts 1 x bubble level

Blackmagic Bi-Directional SDI-HDMI 12G Micro Converter - �8.40

Thu, 23 Apr 2026 01:45:05 +0100

The Blackmagic Bi-Directional SDI-HDMI 12G Micro Converter is the worldand#39;s smallest bidirectional 12g 4k/60 broadcast quality converter! This model can convert in both directions, in different standards at the same time! Youcan convert SDI to HDMI and HDMI to SDI simultaneously. Plus, it supports camera control protocol conversion, so you can use Blackmagic Pocket Cinema Cameras with professional SDI live productionswitchers like our ATEM 4K Pro and control your Blackmagic cameras like the Blackmagic Studio 6k Pro camera or pocket 6K Pro camera. The Micro Converter uses USB-C for power, so it can be powered directly from televisions or laptop computers or with the supplied 5V USB-C power supply. Plug it into your computer and use the Blackmagic software for additional setups like Level A or B settings for 3G signals. The unit has LED status indicator for power. Micro Converters have been engineered with precision electronics so you get very low SDI jitter, allowing you to extend SDI cables over long distances. Thatandrsquo;s vital for live production where equipment such as cameras can be along distance from switchers. Blackmagic Micro Converters work with both 8and 10-bit video formats, in RGB or YUV, and in all SD, HD and UltraHD formats, up to 2160p60. They also support 1080p24, 1080p47.95, 1080p48, 4Kp24, 4Kp47.95 and 4Kp48 film rates. Plus, you get fully embedded audio and timecodesupport. Monitoring with 3D LUTs Get colour accurate monitoring on any type of display - the Micro Converter SDI to HDMI 12G model includes a 3D LUT for colour accurate monitoring! You can apply custom looks, colour and gamma changes in real time for on-set monitoring. LUTs can also be applied to the 12Gand#8209;SDI loop output, allowing you to use the converter as a 3D LUT processor! Latest HDR Support The 12G model have everything for the latest HDR workflows. Simply connect aHDR monitor, projector or TV and you are ready for HDR monitoring! Static metadata PQ and Hybrid Log Gamma (HLG) formats in the VPID are handled according to the ST2108-1, ST2084 and the ST425 standards. Micro Converter 12G models handle ST425 which defines 2new bits in the VPID to indicate transfer characteristic of SDR, HLG or PQ. Plus the ST2108-1 standard defines how to transport HDR static or dynamic metadata over SDI. There is also support for ST2082-10 for 12G SDI as well as ST425 for 3G-SDI sources. Both Rec.2020 and Rec.709 colorspaces aresupported. Convert with Camera Control The new Micro Converter BiDirectional SDI/HDMI 12G model even supports camera control so you can use a Blackmagic Pocket Cinema Camera with an ATEM SDI switcher. ATEM switchers send camera control over SDI, and the converter can translate this to HDMI for the camera. Just connect SDI from the converter out to the switcher input, the switcher program out to the converter input, and then the HDMI converter input connects to the Pocket Cinema Camera. Now add a camera number in the converter utility, and youand#39;ll get control of the camera colour corrector, tally and even remote recording! It even works in reverse, and you can connect and control an SDI camera from an HDMI switcher such as ATEM Mini! Includes HDMI Timecode Support The Micro Converter 12G models use a new Blackmagic Design custom hardware design so theyand#39;re more advanced to better support the technical features that are critical to high end broadcast workflows. These features include support for HDMI and SDI timecode conversion. You even get full support for timecode in both standard definition and high definition video formats. This means if you have any HDMI device that supports timecode, you can convert it to SDI and get that timecode into larger broadcast systems. SDI Reand#8209;clocking Blackmagic Micro Converters include built in SDI re-clocking on the 12G-SDI output. The SDI reand#8209;clocking will regenerate the SDI video, reduce SDI jitter and improve SDI eye pattern before the converter sends the signal to other equipment. This allows longer cable lengths because even degraded SDI signals can still be used. All Blackmagic microconverter models comply with SMPTE 259M, SMPTE 292M, SMPTE 296M, SMPTE 424M and SMPTE 425M broadcast standards. The12G model add SMPTE 2081-10 and SMPTE 2082-10standards. Blackmagic Micro Converter 12G models add all the SDI and HD formats of the 3G models, plus powerful UltraHD and 4K formats. 12G-SDI formats include 2160p23.98, 2160p24, 2160p25, 2160p29.97, 2160p30, 2160p47.95, 2160p48, 2160p50, 2160p59.94, 2160p60, 4Kp23.98DCI, 4Kp24DCI, 4Kp25DCI, 4Kp29.97DCI, 4Kp30DCI, 4Kp47.95DCI, 4Kp48DCI, 4Kp50DCI, 4Kp59.94DCI and 4Kp60DCI, 4KPsF25DCI, 4KPsF29.97DCI and 4KPsF30DCI. Power Supply : +5V universal power supply included with international socket adapters for most countries. Power Consumption : 2.5 W

Sony NPF dual charger with dual NPF battery kit - �8.00

Thu, 23 Apr 2026 01:45:05 +0100

A dual simultaneous charger for Sony NPF batteries and two high capacity NPF batteries. Comes supplied with UK mains lead. Hedbox dual charger for Sony NPF (NP-F) batteries with LED readout of battery state and recharge information. Features a USB port for charging your phone too or iPad with a high 2.1A output. This charger has a large LCD screen that provides clear, accurate, and precise details of the charging status of each battery. Each battery Capacity: 52Wh 7200mAh Battery Mount / Type: Sony NPF / NP-F Battery Technology: Li-ion We have alternative NPF batteries available as well as NPF dummy battery to DTAP adapters for higher power requirements.

DJI SDR Transmission Wireless HDMI SDI Video Kit - �54.00

Thu, 23 Apr 2026 01:45:05 +0100

Hire the amazing DJI wireless video transmission system. Up to 20Mbps video transmission from HDMI or SDI sources at 1080p/60fps up to 3km away with low delay (35ms). We have used the SDR transmission system in live camera projects and the delay is minimal, good enough for focus pulling too. The signal has a strong penetration through walls. Compared to our testing with some Teradek and Atom systems, we have found the DJI SDR transmission has less/no signal interference. Video Monitoring The default setup is HDMI or SDI in from your camera and then HDMI or SDI out on the RX into a video monitor. You can also use the USB-C output on the receiver to connect into a smartphone or tablet to watch the video. In broadcast mode, each transmitter can have an unlimited number of receivers. Additionally, the transmitter allows for direct connection to smartphones or tablets over Wi-Fi, offering a cost-effective, dual-channel monitoring experience without the need for an additional receiver. DJI SDR Transmission supports multiple monitoring methods and can output three SDR signals and two Wi-Fi signals simultaneously. The DJI Ronin APP also allows a range of features to be seen on a smartphone or tablet running the app, such as waveform, false colour, LUT changes, focus peaking as well as local recording and playback! When set in broadcast mode, the Ronin app will also allow the user to switch between 2 different camera sources (two different transmitters needed). Powering the units You can power the transmitter and receiver with an NPF style battery or via a high-powered USB-C power supply. We supply an NPF to DTAP adapter with coiled cable for each end, so you can power from Vlock battery or your camera DTAP output. We also hire long life NPF battery kit if you prefer. We also have NPF to Vlock adapters too, which are useful for the RX end when mounting on a light stand away from a power source. We provide a USB-C 100W power adapter for one RX. You need to use a standard 100w PD protocol charger 9v 2A. When used with DJI RS 4 Pro, DJI RS 4, or DJI RS 3 Pro, the transmitter can be mounted on the gimbal and powered directly by it (usb-c cable), eliminating the need for a separate battery, keeping the gimbal weight down. Technology SDR stands for Software Defined Radio technology, DJI also support Wi-Fi transmission to increase flexibility at local distances. SDR transmission can reach up to 3KM with low latency and high bitrate signal transmission. The devices support seamless auto frequency hopping across 2.4GHz, 5.8GHz and DFS frequency bands. In case of interference, it can automatically switch to the optimal channel, effortlessly tackling complex environmental challenges. SDR mode allows video up to 20Mbps and in Wi-Fi mode (to smartphone app) up to 8Mbps. You can manually change channels on the units, as well as use the DJI Ronin app to monitor channel interference if needed. In most scenarios, you just plug and play though and let the system auto-select the best operating bands. Metadata Transmission and Remote Control DJI SDR Transmission supports metadata transmission from mainstream cinema cameras like ARRI and RED via SDI. This provides directors, cinematographers, and DIT teams with quick access to detailed shooting information in real time. The DJI Ronin app can also control some camera features (ISO, aperture, shutter, stop/start) and DJI RS gimbal features (virtual joystick, gimbal recentering). Connecting the camera USB-C port to the USB-C port on the Transmitter to get some control features. Our Blackmagic 6K Pro support remote control of ISO, Focus and shutter speed this way. Two Way Comms You can plug a TRRS mic headset into the TX unit (The same mini jack input works with our Talkback headsets) and talk with someone on the RX end with a similar headset. This allows you two-way audio comms from the TX unit to one of the RX units when in control mode. Ask us about suitable head sets and mic cable extensions. This can make a simple talkback system for communicating with the remote camera operator. Whatand#39;s in the Kit? 1 x DJI SDR Transmission TX unit 2 x DJI SDR Transmission RX units 2 x NPF to DTAP adapters 2 x Baby pin/light stand mounts (one fits the Smallrig adapter below) 1 x Camera TX mount (Smallrig Teradek mount) 2 x Screw in cold shoe mounts 1 x 15mm spud adapter 2 x DJI mounts for Gimbal - allowing you to mount the TX on a DJI gimbal 2 x 100W USB-C Power Adapter with USB-C to USB-C cable Notes: The DJI SDR Transmission does NOT work with the DJI Transmission (separate product) and if they are used at the same location you must ensure that the central frequencies do not overlap. The SDR Transmission does NOT connect to the DJI Focus Pro. SDR Transmission works with Ronin RS 3 Pro, RS4, RS4 Pro When connecting via Wi-Fi for the first time to a smartphone or tablet, use the QR code to connect if password is not known.

Blackmagic Studio Camera 6K Pro EFmount 12G SDI - �50.00

Thu, 23 Apr 2026 01:45:05 +0100

Now available to hire: the Blackmagic Studio Camera 6K Pro EF mount with 7-inch viewfinder, built in ND filters, dual native ISO, live-streaming support built-in, support for the Blackmagic Focus Demand and Zoom demand as well as Tally indicator and ability to record 4k and 6k Braw to SSD. This camera has a super 35mm sensor like the Blackmagic pocket cinema camera 6k Pro and takes the same Canon EF mount lenses like our Canon CNE par focal 18-80 zoom, the Tokina 11-16mm, Tokina16-50mm EF zooms and the Canon 24-70mm and Canon 17-55mm as well as our range of Nikon prime lenses with EF mount. The Blackmagic Studio Camera 6K is designed for live production, but is not limited to use with alive switcher like the ATEM. But when used with a Blackmagic switcher, you can control the camera features including the ND filters from your computer. The Studio EF camera has no built-in recording, but can record Blackmagic RAW to external SSD drives over USB-C. Thelarge 7 viewfinder makes it perfect for work such as chat shows, television production, broadcast news, sports, education, conference presentations and even weddings. Thelarge bright display with side handles, touch screen and physical controls makes it easy to track shots while being comfortable to use for long periods of time. Because itandrsquo;s so lightweight, itandrsquo;s perfect when youand#39;re constantly changing locations and doing different kinds ofwork. TheBlackmagic Studio Camera features gain from -12dB (100 ISO) up to +36dB (25,600 ISO) so itand#39;s optimized to reduce grain and noise in images, while maintaining the full dynamic range of the sensor. Theprimary native ISO is 400, which is ideal for use under studio lighting. Then the secondary high base ISO of 3200 is perfect when shooting in dimly lit environments. Thegain can be set from the camera, or remotely from aswitcher using the SDI or Ethernet remote cameracontrol. This is similar/identical to the Blackmagic pocket cinema camera 6k sensor. The studio camera itself allows you to connect 2 x XLR microphones, plus an external mic as well as having 2 built in mics. There is a headphone socket as well as a 5 pin talkback connection if you have the right kit. There are 2 x usb-c ports with locking connections, allowing you to connect to an SSD or to a focus demand controller. The 2channel balanced XLR inputs support +24dBu line level and have an ultra low noise microphone preamplifier with P48 phantom power alongside an equivalent input noise (E.I.N.) of -131dBV(A). Thatand#39;s followed by two 117dB high dynamic range analogue to digital converters, so you get the high-end audio demanded by broadcasters and audio engineers. So no need for a pre-amp.. The XLR supports Phantom power +48V. The other side of the camera has the video connections - there is a 12G SDI connection for connecting into a switcher or monitor or to a wireless connection as well as an HDMI out which can be run at a different rate so you can get 4k 12G as well as 1080 out of the HDMI to suit many wireless connections. There is a 10G Ethernet port which allows all signals and camera power using a single Cat 6A copper Ethernet cable! That includes the camera video, program return, tally, talkback, camera control and more, if you have appropriate connectivity (Blackmagic Studio Converter) to use this. There are three ways to power the camera - a locking barrel connector for use with DTAP for Vlock power or via the supplied mains lead, or use a 4 pin XLR cable for power, plus POE Ethernet if you are using that method. The large 7-inch touchscreen has menus for camera settings, and there are physical knobs for brightness, contrast and focus peaking to make it easier under studio use conditions. There is a tripod mount with mounting plate included for fastsetup, which includes 15mm rod mount to add-on accessories like a Matt box or mount support for a long lens. The studio camera supports Blackmagic gen 5 colour science via LUTs, same as the cinema cameras. The colour corrector can even be controlled from the switcher using the SDI return (SDI in) or over HDMI to ATEM mini. With 13stops of dynamic range, the camera has darker blacks and brighter whites, perfect for colour correction. Great for bothHD and UltraHD production, the 6K model has aresolution of 6144x3456 with 12G 4K over SDI and over HDMI. Note: you cannot record in HD on this camera, so the minimum recording spec to SSD is 4K. Live stream direct from the studio camera The 6k EF studio camera has built in live-streaming. This means you can place acamera in aremote location, and it can generate aH.264 HD live stream that is sent over the internet back to the studio. Simply connect the camera to the internet using the built-in Ethernet connection, or you can connect a4G or 5G phone to the USB-C port to stream via remote data. Thelive stream is received in the studio by an ATEM Streaming Bridge where itand#39;s converted back to video for connection to aswitcher via SDI or HDMI. TheATEM Streaming Bridge can even send tally, talkback and camera control back to the camera, which is pretty cool! Why not couple the Blackmagic studio camera with a CNE cine zoom lens with zoom rocker and focus demand controller to create an awesome live camera with braw recording to SSD or via SDI to a hyperdeck mini.

DJI Focus Grip for Handheld rig Start-Stop Control - �10.00

Thu, 23 Apr 2026 01:45:05 +0100

Create a simple handheld rig for your camera with the DJI Focus grip and couple it with the DJI Focus Motor Pro for easier control over your lens focus (or zoom). Grab one of our Blackmagic 6K Pocket Cinema Pro cameras with full cage and attach the DJI focus motor Pro and DJI Focus handgrip with a 15mm rod. The DJI Focus Grip connects to the DJI focus motor Pro via usb-c to power and control it. This lets you control focus from your fingertip in the same way as you would control focus on the DJI Ronin Gimbal. You can use this set up for focus control of manual focus lenses like our range of Nikon EF mount Prime lenses or set the AF lenses into MF mode and use them with a lens ring (cine pitch). If you need autofocus over manual lenses, then add the DJI Lidar for AF control. You can also use the Focus Gripand#39;s Red button as a Remote Start/Stop Record button with the Blackmagic 6k Pocket Cinema Pro camera (and other cameras) - connect to the camera via Bluetooth, and itand#39;s all ready to go. The Focus Handgrip includes a DJI BG21 battery grip, a nato rail and 15mm rod adapter and usb-cable. The battery grip is charged via usb-c port. The grip has a 1.8 inch colour touch screen that can be used for various setup and control functions like setting manual focus end points and seeing where you are in the focus scale. This is more for run and gun scenarios rather then serious focus pulling but it works well on a small rig setup. Compatibility DJI Focus Pro LiDAR DJI Focus Pro Motor

DJI Focus Motor Pro - �5.00

Thu, 23 Apr 2026 01:45:05 +0100

The DJI Focus Motor Pro is an upgrade to the focus motor that ships with the DJI Ronin gimbal and offers greater torque and connectivity to remote accessories, allowing you to set up multiple units into a FIZ (Focus/Zoom/Iris) combo on your rig. You can hire the focus motor Pro kit with our RS2 Pro gimbal, or on its own to use with the DJI Focus Grip or other accessories on a non-gimbal rig. The motor can be powered via usb-c from the gimbal directly - you can use the gimbal focus control to set and adjust the motor in the same way as the original focus motor. This kit comes with itand#39;s own baseplate and a 15mm rod because the original DJI focus motor is not compatible with the 15mm rods. The motor speed has been increased by 30% for more responsive control over focus, zoom, or aperture. The latency is as low as 10 milliseconds, ensuring swift control response when paired with the DJI Focus Pro Hand Unit. The motor features a built-in RF antenna that allows for linking with the DJI Focus Pro Hand Unit. When paired with the DJI Focus Pro Grip, the grip can power the motor via the USB-C port without any extra battery options needed. The motor can be powered through third-party devices, but do not use an extra device to power the DJI Focus Pro Motor when it is already powered (e.g., by the DJI Focus Pro Grip), as this may cause device damage. Compatibility DJI RS 4 Pro DJI RS 4 DJI RS 3 Pro DJI RS 3 DJI RS 2 Pro DJI Focus Pro Grip DJI Focus Pro Hand Unit DJI Ronin 4D Flex Comes with a USB-C cable for powering the unit.

Alvins Cables NPF dual sided dummy battery DTAP - �1.00

Thu, 23 Apr 2026 01:45:05 +0100

Sony NPF dummy battery with coiled cable and 2 pin DTAP/P-TAP connector to power devices from DC Vlock ports to devices that would normally take NPF batteries. Allows you to use much higher rated Vlock batteries to last all day. We use a couple of these as part of the DJI SDR Wireless video transmission kit.

Blackmagic Focus Demand Controller - �7.20

Thu, 23 Apr 2026 01:45:05 +0100

Available to hire, the and#1042;land#1072;and#1089;kmand#1072;gand#1110;and#1089; Focus Demand Controller - complete with tripod pan handle mounting. This and#1110;and#1109; and#1072; hand#1110;gh-and#1077;nd fand#1086;and#1089;uand#1109;and#1110;ng tool, which and#1110;and#1109; designed for and#1042;land#1072;and#1089;kmand#1072;gand#1110;and#1089; Studio Cameras and works with other modern Blackmagic cameras that have a USB-C port for control. When and#1072;ttand#1072;and#1089;hand#1077;d to either the and#1042;land#1072;and#1089;kmand#1072;gand#1110;and#1089; and#1029;tudand#1110;and#1086; 6K pro camera, Pocket Cinema 6k Pro, Studio 4and#1050; and#1056;rand#1086;, Micro Studio 4K camera, and#1086;r 4and#1050; and#1056;luand#1109;, thand#1110;and#1109; tand#1072;and#1089;tand#1110;land#1077; fand#1086;and#1089;uand#1109; whand#1077;and#1077;l and#1072;ffand#1086;rdand#1109; fand#1072;and#1109;t, and#1072;and#1089;and#1089;urand#1072;tand#1077;, and#1072;nd and#1109;mand#1086;and#1086;th fand#1086;and#1089;uand#1109; and#1089;and#1086;ntrand#1086;l when your lens is set to AF mode. You can use the second USB-C connection on the focus controller to loop through to an SSD for recording - this feature works on Studio cameras and on the pocket cinema Pro cameras that we have tested it on. The second usb-c can also be used to loop through to the Blackmagic Zoom Demand controller if you have a compatible lens or to a usb-c SSD for recording. and#1042;and#1091; mand#1110;mand#1110;and#1089;kand#1110;ng and#1072; true broadcast lens, you are able to control focus directly from the tripod handles, rather then directly on the lens itself. and#1042;and#1091; dand#1086;and#1110;ng and#1109;and#1086;, and#1091;and#1086;ur frand#1072;mand#1110;ng rand#1077;mand#1072;and#1110;nand#1109; and#1109;tand#1072;bland#1077; and#1072;nd and#1109;mand#1072;ll and#1072;dand#1112;uand#1109;tmand#1077;ntand#1109; and#1089;and#1072;n band#1077; mand#1072;dand#1077; tand#1086; thand#1077; fand#1086;and#1089;uand#1109; thrand#1086;ughand#1086;ut thand#1077; and#1088;rand#1086;duand#1089;tand#1110;and#1086;n. and#1058;hand#1077; Fand#1086;and#1089;uand#1109; Dand#1077;mand#1072;nd and#1089;and#1086;nand#1109;and#1110;and#1109;tand#1109; and#1086;f and#1072; thrand#1077;and#1077;-and#1088;rand#1086;ngand#1077;d fand#1086;and#1089;uand#1109; whand#1077;and#1077;l, whand#1110;and#1089;h guand#1072;rand#1072;ntand#1077;and#1077;and#1109; and#1109;uand#1088;and#1077;r and#1109;mand#1086;and#1086;th focus and#1072;dand#1112;uand#1109;tmand#1077;ntand#1109;. We have tested the Blackmagic focus controller with our range of EF mount AF lens, and it works with all of the AF lenses including the Canon CNE 18-80 zoom lens, Canon 17-55 EFS lens, Tokina 11-16mm lens, Tokina 16-50mm lens as well as our Canon 24-70mm f2.8 lens. Just remember to set your lens to AF mode. It seems if your lens can do single shot AF through the camera then it should work with the focus controller. and#1042;land#1072;and#1089;kmand#1072;gand#1110;and#1089; Fand#1086;and#1089;uand#1109; Dand#1077;mand#1072;nd and#1050;and#1077;and#1091; Fand#1077;and#1072;turand#1077;and#1109;: and#1053;and#1110;gh-and#1077;nd fand#1086;and#1089;uand#1109; tand#1086;and#1086;l fand#1086;r and#1042;land#1072;and#1089;kmand#1072;gand#1110;and#1089; and#1029;tudand#1110;and#1086; and#1057;and#1072;mand#1077;rand#1072;and#1109; and#1057;and#1086;mand#1088;and#1072;tand#1110;bland#1077; wand#1110;th thand#1077; and#1042;land#1072;and#1089;kmand#1072;gand#1110;and#1089; and#1029;tudand#1110;and#1086; 6k Pro, 4and#1050; and#1056;rand#1086; and#1072;nd 4and#1050; and#1056;luand#1109; Works with teh Blackmagic Pocket Cinema Camera 6k Pro and 6k and#1040;ffand#1086;rdand#1109; fand#1072;and#1109;t, and#1072;and#1089;and#1089;urand#1072;tand#1077;, and#1072;nd tand#1072;and#1089;tand#1110;land#1077; fand#1086;and#1089;uand#1109; and#1089;and#1086;ntrand#1086;l and#1057;and#1086;ntrand#1086;l fand#1086;and#1089;uand#1109; dand#1110;rand#1077;and#1089;tland#1091; frand#1086;m thand#1077; trand#1110;and#1088;and#1086;d hand#1072;ndland#1077;and#1109; and#1045;land#1110;mand#1110;nand#1072;tand#1077;and#1109; thand#1077; nand#1077;and#1077;d tand#1086; rand#1077;and#1072;and#1089;h fand#1086;rwand#1072;rd tand#1086; thand#1077; land#1077;nand#1109; and#1052;and#1110;mand#1110;and#1089;and#1109; and#1072; truand#1077; brand#1086;and#1072;dand#1089;and#1072;and#1109;t land#1077;nand#1109; and#1058;hrand#1077;and#1077;-and#1088;rand#1086;ngand#1077;d fand#1086;and#1089;uand#1109; whand#1077;and#1077;l guand#1072;rand#1072;ntand#1077;and#1077;and#1109; and#1109;mand#1086;and#1086;th fand#1086;and#1089;uand#1109; and#1072;dand#1112;uand#1109;tmand#1077;ntand#1109; and#1040;ddand#1110;tand#1110;and#1086;nand#1072;l knurland#1077;d tand#1077;and#1093;turand#1110;ng and#1077;nand#1109;urand#1077;and#1109; and#1072; and#1109;and#1077;and#1089;urand#1077; grand#1110;and#1088; and#1057;and#1086;nand#1109;and#1110;and#1109;tand#1109; and#1086;f Uand#1029;and#1042;-and#1057; and#1040; and#1072;nd Uand#1029;and#1042;-and#1057; and#1042; and#1088;and#1086;rtand#1109; Quand#1110;and#1089;k and#1072;nd and#1077;and#1072;and#1109;and#1091; and#1072;ttand#1072;and#1089;hmand#1077;nt and#1088;rand#1086;and#1089;and#1077;and#1109;and#1109; Whand#1072;tandrsquo;and#1109; and#1110;n thand#1077; band#1086;and#1093;? 1 x and#1042;land#1072;and#1089;kmand#1072;gand#1110;and#1089; Fand#1086;and#1089;uand#1109; Dand#1077;mand#1072;nd Controller 1 x Locking USB-C cable 1 x Pan handle mount

IDX V-Lock Endura E7s batteries 68wh - �3.00

Thu, 23 Apr 2026 01:45:05 +0100

The compact and lightweight ENDURA-7S has a capacity of 68Wh and features an integrated 3 step LED Power Indicator to display the battery capacity status. Economical and distinctive in design, the E-7S is built to the highest standards of quality, safety and reliability proven in all ENDURA batteries. The Power Indicator is for quick reference of the charge status on the E-7S. A simple 3 LED indicator shows if the battery is full or requires charging. A slimmer alternative to our PAG V-lock batteries, often paired with our DJI RS2 Gimbal when using the Tilta Vlock plate, the slim IDX E7-s Endura V-lock batteries support a wide range of smaller equipment. The battery has a capacity of 68 watt-hour capacity with a weight of only 522g. They mount using a standard v-lock fitting, and we have a range of power plates to output the power via different cable types. The IDX batteries are lighter and thinner than most Vlocks, making them more versatile when shooting with equipment that is not so power hungry. The dual charger can charge 2 batteries in parallel, or it can also be used to power an XLR4 device using an XLR4 cable. If you need a charger kit, then see this IDX battery dual charger kit with 2 IDX E7-s batteries.

FX LION NANO V-lock NATO rail swivel mounting kit - �3.00

Thu, 23 Apr 2026 01:45:05 +0100

FX LION NANO V-Lock Battery Plate with swivel mount and screw fit nato rail This plate offers a lightweight and flexible solution for mounting V-lok battery to your rig The Nato rail can be screwed to a cage or camera mounting plate, allowing a flexible, adjustable support bracket to support the FX Lion nano plate. The power plate features a single D-tap output. NANO V-lock battery Converter Plate Input:10-16.8V Dtap Output: 10-16.8V

Samsung Portable SSD T7 2TB (USB-C) - �5.00

Thu, 23 Apr 2026 01:45:05 +0100

Designed for use with the Blackmagic Packet Cinema Camera 6K, Focus assist 4K and similar cameras, the Samsung Portable SSD T7 Shield has a V-NAND flash memory and a USB 3.2 Gen 2 interface - providing transfer speeds of up to 1050 MB/s Specs: Capacity: 2TB Interface: USB 3.2 Gen 2 (10Gbps), backwards compatibility Read Speed: Up to 1050 MB/s Write speed: Up to 1000 MB/s Weight: 58 g Dimensions: 88 x 59 x 13 mm

Aputure MT Pro LED battery powered mini tube light - �16.00

Thu, 23 Apr 2026 01:45:05 +0100

Now available to hire, the Aputure MT Pro LED battery powered full colour mini tube light The MT Pro is Aputureandrsquo;s first-ever full-color mini LED tube light. Condensed into its compact 1-foot frame, the MT Pro shines brightly with professional features that stand above the rest andndash; including industry-leading pixel density and wireless CRMX connectivity Its show-stopping feature is its unmatched pixel density. With 36 RGBWW pixels inside of a 1-foot tube-style LED, the MT Pro produces incredibly smooth pixel chases and effects, with the ability to transition between pixels at high speeds. The MT Proand#39;s 7.5 max output power is able to produce up to 614 lux at 0.5 meters, and utilizes the same foundational RGBWW technology as other professional fixtures, including the LS 600c Pro and Nova P600c. The proprietary chipset produces stunning colour quality throughout its wide CCT range of 2,000K to 10,000K with full green-magenta adjustment, and the ability to reproduce andgt;90% of Colours Within Rec.2020 Colour Space. The MT Pro will always produce accurate skin tones with Aputureand#39;s high standards for colours, measuring at CRI: 95+, TLCI: 98+, SSI (D56): 73, and SSI (Tungsten): 84. In addition to 9 System FX and 7 Pixel FX, the MT Pro is equipped with other advanced features unique to the Aputure and amaran ecosystems, such as Picker FX and Custom FX which can be stored using the Sidus Link app for easy access to different light modes. The solid construction of the MT Pro also benefits Aputureandrsquo;s high standard for build quality, with its lightweight 391g aluminium housing, and built-in USB-C rechargeable battery that can operate the MT Pro at its 7.5W max output for 120 minutes. Featuring ultra-thin bezels and a 180anddeg; aperture, the MT Pro can be left bare for greater lighting coverage and used as an in-camera practical. Alternatively, use the MT Proand#39;s integrated magnets, the included mini tripod, or collapsible 45anddeg; light control grid for additional versatility and control across all shooting environments. Included in the kit: 1 x MT Pro 1 x 45anddeg; Fabric Light Control Grid 1 x Mini Tripod with 1/4-20in Ball Head 1 x USB Type-C Charging Cable 1 x Carrying Case Key Features 7.5W Output Pixel-Mappable RGBWW Mini Tube LED 614 lux @ 0.5m (6500K) Industry-leading Pixel Density: 36 Pixels in 1 Foot tub Ultra-Fine Pixels: 0.8cm (0.3in) Wide Ultra-Thin Bezels andamp; 180anddeg; Aperture CRI: 95, TLCI: 98, TM-30 Rf (ave.): 93, TM-30 Rg (ave.): 102, SSI (D56): 73, SSI (Tungsten): 84 Fully Tunable CCT from 2,000K to 10,000K Fully Tunable Green-Magenta Adjustment (Full Plus/Minus Green) Built-In Lithium-polymer Battery (approx. 120 min. @ Max Power) andgt;90% of Colours Within Rec.2020 Colour Space Advanced HSI with White Point CCT Control Industry-standard X,Y (CIE 1931) andamp; RGB Tunability 0-100% Stepless Brightness Control Multiple Control Methods: Sidus Link Bluetooth App Control, DMX/RDM*, LumenRadio CRMX Supports SidusPro FX, Including Manual FX, System FX, Picker FX, Magic Program, and Music FX Save Up to 10 Custom FX and 10 Music FX for Quick Access 19 DMX Profiles: High andamp; Low-Density Pixel Controls 9 Built-In System FX: Fireworks, Fire, Paparazzi, Faulty Bulb, TV, Pulsing, Cop Car, Lightning, Party Lights 7 Built-In Pixel FX: Colour Fade, Colour Cycle, One Pixel Chase, Two Pixel Chase, Three Pixel Chase, Rainbow, Pixel Fire *Wired USB-C to 5-Pin XLR In andamp; Out DMX Dongle required for DMX/RDM

Manfrotto Skylite Rapid Knuckle Griphead - �1.20

Thu, 23 Apr 2026 01:45:05 +0100

The Skylite Griphead is to be affixed to stands and offers tilting as needed for the Skylite Rapid. Although simiar to the Avenger D200 - this is designed sepcially for the Skylite Rapid frame Use this grip head with our baby boom arms for mounting a diffuser panel high up or use it with a grip head extension arm for lighting control.

Manfrotto Alu-Twin MS Tripod with 504x Video Head - �16.80

Thu, 23 Apr 2026 01:45:05 +0100

The Manfrotto Alu Twin MS tripod is a stable aluminium camera support with a mid-level spreader. The tripod has a load capacity of 20kg, a minimum height of 58.5cm and a max height of 169cm. The tripod is supplied with an adjustable mid-level spreader and is packed in a zip bag. The 504x head has a flat base and can be removed to use on a slider and features advanced fluid drag system and counter balance. 4 steps counterbalance and fluidity on both PAN andamp; TILT powered by new fluid technology from manfrotto. 4 steps counterbalance system up to 6,5 kg/14,3 lb at 55 mm/2,2 in C.O.G ensures quick set up and optimal performance. Extremely smooth movements are guaranteed by the fluidity function on PAN andamp; TILT. The head has a maximum payload of 12kg The 504x kit is supplied in a semi-rigid carry bag with a quick release plate for the head

Blackmagic MultiView 4 input 2x2 6G SDI - �15.00

Thu, 23 Apr 2026 01:45:05 +0100

Now available for hire, Blackmagic MultiView 4 input SDI 4K UHD in mini Teranex deskop/ rack format. Each SDI input port has a loop-through so you can run this inline to your vision mixer for exra monitoring or as a confidence monitor for a multi camera shoot. Output via HDMI to a large 4K TV or over SDI to see up to 4 inputs at the same time. The Blackmagic MultiView 4 is a multi viewer that lets you monitor 4 completely independent SDI video sources on a single display. Featuring 4 x 6G-SDI inputs with full re-synchronization, MultiView 4 lets you monitor any combination of SD, HD and 6G Ultra HD video formats and frame rates all at the same time. Blackmagic MultiView 4 can output to both 1080 HD and 2160p Ultra HD displays so you connect it to either regular HD or Ultra HD televisions. If you connect an Ultra HD television or monitor, you can take advantage of the extra resolution of Ultra HD and see full resolution 1920 x 1080 HD in each view for incredible sharpness! You can even turn on audio meter overlays, custom labels, borders and tally in each view and assign SD as 4:3 or 16:9. Control from the front panel or via ethernet control via Blackmagic Teranex app. The Multiview 4 Is rack-mountable with our other blackmagic devices such as the Hyperdeck Studio Mini The Multiview 4 is supplied with a UK mains cable but will work from POE switch over ethernet. It has been upgraded with a Teranex mini control panel andamp; LCD screen to allow easy switch control - turn on/off audio meters, atally, labels and border. You can toggle each input and check input rate and assign audio on the multiview to one of the SDI inputs. Use the Blackmagic app over ethernet to set the labels. SPECIFICATIONS Connections SDI Video Inputs: 4 x 10-bit SD-SDI, HD-SDI and 6Gand#8209;SDI. SDI Video Outputs: 4 loop, 1 HD/Ultra HD output with multiview. SDI Rates: 270Mb, 1.5G, 3G, 6G. SDI Video Multi View Outputs: 1 x 10-bit HD-SDI and 10 bit 6Gand#8209;SDI HDMI Video Multi View Outputs: 1 x HDMI type A connector. Output supports EDID of the monitor. SDI Reclocking: On all SDI outputs, auto switching between standard definition, high definition or 6Gand#8209;SDI video. Reference Input: None Multi Rate Support: Auto detection of SD, HD or 6Gand#8209;SDI. Simultaneous viewing of 4K, HD and SD video. Standards SD Video StandardsL 525i59.94 NTSC, 625i50 PAL HD Video Standards: 720p50, 720p59.94, 720p60, 1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50,1080p59.94, 1080p60, 1080PsF23.98, 1080PsF24, 1080PsF25, 1080PsF29.97, 1080PsF30, 1080i50, 1080i59.94, 1080i60 2K Video Standards: 2K DCI 23.98p, 2K DCI 24p, 2K DCI 25p, 2K DCI 23.98PsF, 2K DCI 24PsF, 2K DCI 25PsF Ultra HD Video Standards: 2160p23.98, 2160p24, 2160p25, 2160p29.97, 2160p30 4K Video Standards: 4K DCI 24p SDI Compliance SMPTE 259M, SMPTE 292M, SMPTE 296M, SMPTE 425M, SMPTE 425M-B, ITUand#8209;R BT.656 and ITUand#8209;R BT.601. Audio Meters: Each view, VU standard. Source Routing: None SDI Video Sampling: 4:2:2 SDI Audio Sampling: Television standard sample rate of 48kHz and 24and#8209;bit. SDI Color Precision: 10-bit 4:2:2 SDI Color Space: YUV SDI Auto Switching: Automatically selects between SDand#8209;SDI, HDand#8209;SDI, and 6Gand#8209;SDI on each input so that each input can be running a different television standard. SDI Metadata Support: Video payload identification ancillary data as per SMPTE 352M. Control: Teranex Mini Smart Panel which adds menus and 2.2 inch color display. Power Requirements Power Supply: IEC power cable required, 100 and#8209; 240V AC input. Power Fail Protection: MultiView 4 settings preserved and restored instantly at power on. Power over Ethernet: Can be powered via 48V DC using PoE+ (power over ethernet) Power Consumption: 16 Watts

BNC 75ohm Coax Video Cables HD-SDI under 10m - �2.00

Thu, 23 Apr 2026 01:45:05 +0100

The standard video interconnection cables for pro video gear - SDI cables. Why settle for dodgy HDMI cables falling out of your camera gear when you can rig up with solid coax cables that stay locked in place? We stock a range of SDI cable lengths. Here we have bundled together all of the cables under 10m in length We also stock cables in 10m, 20m and 50m lengths We have a range of 75 ohm BNC coax HD SDI video cables for a professional video cameras and accessories and for connecting SDI monitor. These coax cables feature a locking BNC end ensuring that they stay firmly connected to your equipment. Co-axial cables feature a shield to help isolate noise from video signals. We have coax cables available in various lengths to suit dolly connections or jibs. if you only have HDMI connections on your camera then we suggest you look at our HDMI-SDI converters to allow you to gaffer or lock off your HDMI and then attach a monitor to your SDI coax cable instead. We have a great SDI monitor that is great on set for focus pulling or as a directors monitor. If you really donand#39;t like cables between your camera and video gear then why not try our Teradek Bolt zero-delay wireless video sender system instead. This device removes the need for any cables to your directors monitor and coupled with the Redrock micro wireless follow focus system you can focus pull for jib and dolly shots with ease.

BNC 75ohm Coax Video Cables 12G-SDI 10m - �8.40

Thu, 23 Apr 2026 01:45:05 +0100

The standard video interconnection cables for pro video gear - 12G SDI cables. Here we have one of our our mid-length cable options, the 100m SDI cable. Perfect for small rooms, this cable is suitable for most venues and rooms We also have available a range of shorter cables available for hire including the longer 20m andamp; 50m cables and many shorter options. These coax cables feature a locking BNC end ensuring that they stay firmly connected to your equipment. Co-axial cables feature a shield to help isolate noise from video signals. if you only have HDMI connections on your camera then we suggest you look at our HDMI-SDI converters to allow you to gaffer or lock off your HDMI and then attach a monitor to your SDI coax cable instead. We have a great SDI monitor that is great on set for focus pulling or as a directors monitor. If you really donand#39;t like cables between your camera and video gear then why not try our Teradek Bolt zero-delay wireless video sender system instead. This device removes the need for any cables to your directors monitor and coupled with the Redrock micro wireless follow focus system you can focus pull for jib and dolly shots with ease.